Thursday, October 23, 2014
Class A headphone amplifier diagram
Class A headphone amplifier
 |
| Class A headphone amplifier |
SMS Remote controller circuit
SMS Remote controller is a device used to control a device remotely using SMS through GSM mobile phones. Process control equipment with a series of AVR ATTiny To SMS Remote Controller can be used to control life and death of these equipment will provide information on the status of replies to our phone in return successful command execution.
Equipment can be controlled by a series of AVR ATTiny To SMS Remote Controller include lights, water pumps, garage doors, gates and much more. AVR series ATTiny To SMS Remote controller uses the module-47 Sony ericson GM as recipient and sender of the SMS module. Then to the SMS data processor on a series of AVR ATTiny To SMS Remote controller is using AVR microcontroller ATTiny 2313.
Series AVR ATTiny To SMS Remote Controller
 |
| SMS Remote controller circuit Click to view larger. |
AVR circuit this part ATTiny To SMS Remote Controller
AVR series ATTiny To SMS Remote controller uses the AVR attiny2313 with 4MHz clock frequency, GSM Module GM trnceiver 47 Sony ericson, SIM Card, 4 relays and an IC regulator. ATTiny AVR microcontroller 2313 can work well on the voltage 2.7 VDC - 5.5 VDC for working with the frequency at 10MHz bahwah.
The set of AVR ATTiny In SMS Remote Controller To make use of this power supply from the batteries 3.3 VDC. Connection using a SIM Card SIM Card Holder which is connected to the module GM-47, AVR series ATTiny To SMS Remote Controller works with communication between AVR ATTiny and GM-47 module at 9600bps. In a series of AVR ATTiny To SMS Remote controller is equipped with LED D6 as an indicator of the data interconnect GM-47 module with cellular operators where this LED will light continuously when not apat network and will be lit by flashes when a signal from the operator.
Specifications AVR series ATTiny To SMS Remote Controller
- 4 Relay for ON / OFF electronic devices
- 8 input lines for reading in a normal switching
- LED indicators signal operator
- SMS command with password, so only the owner can operate
Power Amplifier for Audio Laptop
Frequently, the sound yield from a laptops fabricated-in speakers is flat. A capacity intensifier is needed to get an elevated volume. Here is an effortless circuit to intensify the laptops sound yield.
The circuit is constructed around capacity enhancer IC LA 4440 (IC1) and a few alternate parts. LA4440 is a double channel sound capacity speaker. It has level twisting over a vast run of flat to towering frequencies with exceptional channel detachment. Inbuilt double channels prepare it for stereo and extension speaker provisions.
In double mode LA4440 gives 6 watts for every divert and in scaffold mode 19-watt yield. It has swell denial of 46 dB. The sound impact might be grasped by utilizing several 6-watt speakers. Associate binds 2, 6 and ground of IC1 to the stereo jack which is to be utilized with the laptop. Collect the circuit on a customary-reason PCB and encase in a suitable bureau. The circuit works off managed 12V capacity supply. It is suggested to utilize sound enter socket in the circuit plank. Utilize a decent hotness-sink for LA4440.
Adapter power supply and charger circuit
Basically adapter, power supply and charger circuit has a similar construction which consists of a transformer, rectifier (rectifier) and smoothing the voltage. For there is usually an additional power supply voltage stabilizer of voltage regulator IC LM series 78XX or 79XX .
Below is a schematic circuit adapter, power supply, or battery charger (for gadgets, mobile phones, MP4player, smartphone) that is equipped with a 5V voltage stabilizer:
 |
| Adapter, power supply and charger circuit |
Sunday, October 19, 2014
Headlight Reminders circuit diagram
These two headlight reminder circuits are easy to install and operate on the KISS (Keep It Simple Stupid) principle. The simple circuit involves adding just a 12V piezo buzzer between the lights circuit and a door switch. The buzzer sounds if the lights are left on and you open a door. The disadvantage of this simple circuit is that its annoying to have the buzzer sound continuously if you want to leave the door open while the lights are on. The improved circuit overcomes that problem by adding a 1000µF capacitor and a parallel 100kO resistor in series with the buzzer. Now, when a door is opened, the buzzer gives a brief burst of sound only, while the 1000µF capacitor charges. The 100kO resistor discharges the capacitor when the lights are switched off.
Circuit diagram:
![]( "simple")
Simple Headlight Reminders Circuit DiagramAuthor: Andrew Gibbs
Circuit diagram:
Simple Headlight Reminders Circuit Diagram
Saturday, October 18, 2014
CA3140 TIP41 2N3055 Lab Power Supply 0 30V 2A
This is the schematic of the 30V/2A power supply I use in my own lab.It may look very complex, but it really isn’t very difficult to understand: it uses only the knowledge we’ve learned in the previous lessons.
The top part looks like the power supply we built in Lesson 7: the transformer L1 transforms the outlet voltage to a safe 30V, which is rectified by bridge rectifier G2 and smoothed by capacitor C5. Transistors T3 and T6 form a darlington transistor. This darlington replaces transistor T1 in Lesson 7. However, the base voltage is not controlled by a simple potmeter, but by an ‘electronic potmeter’ with voltage feedback. The advantage of this feedback is a load-independent output voltage.
Read more original source:
http://www.hobby-electronics.info/go.php?to=11000
Wireless Headphone System Schematic
Wireless Headphone System Schematic
Wireless Headphone System Schematic
A wireless headphone system has recently been proposed in which a signal is ... 1 is a schematic perspective view illustrating a wireless headphone system
Subscribe to:
Posts (Atom)
